With Elskbar Natural Snap-In you get an AIO (all-in-one) cloth diaper to suit your child from 6-18 kg. The diaper has a waterproof diaper shell and two bamboo and organic cotton inserts.
Natural Snap-In cloth diaper from Elskbar is a true luxury diaper in Danish design. With the irresistible unisex prints, super absorbent inserts in natural materials, and a perfect fit, it is going to be the best diaper in your stash.
A DIAPER GROWING WITH THE BABY
This diaper can be used from about 6 – 18 kg. It is a one size diaper that can be set in three sizes using the snaps at the front of the diaper. This way you can always get the diaper to grow with your child.
THE SNAP-IN AIO DIAPER
Elskbar Natural Snap-In is an AIO diaper, but with our clever design, inserts can be unsnapped, which will shorten the drying time significantly. The entire diaper needs to be washed after use, as the diaper shell has a built-in absorbency and gets wet.
We call this type of diaper a Snap-In AIO.
SUPER ABSORBENT INSERTS MADE OF NATURAL MATERIALS
The diaper comes with two inserts – a long insert and a smaller booster. Both inserts are made of three layers of bamboo and organic cotton. Bamboo is known to be a very absorbent material, which is suitable for cloth diapers. The organic cotton adds extra softness to the inserts.
If your child pees a little, you can choose to only use the small booster and have a nice trim fit.
If your child pees a lot you can use the long insert that folds double.
You can use both inserts if your child pees a lot, for naps or night.
When using both inserts the diaper has 9 super absorbent layers and if you fold the long insert a second time it turns into 12 layers of absorbency. That’s a lot.
This way, you can vary and adapt absorbency to your child’s needs.
The inside of the diaper shell has a layer of bamboo terry which gives the diaper an extra layer of absorbency and at the same time it is soft and gentle against your child’s skin.
Outer material: 100% polyester with TPU laminate
Inner material: 85% bamboo, 15% polyester
Material: 70% bamboo, 30% cotton
The entire diaper should be washed after use. It is important to snap off the inserts before washing. The diaper has to be washed at max 60 degrees with a cold prewash. Avoid detergents containing fabric softeners, optical brighteners, or chlorine bleach.
We recommend hanging the insert to dry, but they can be tumbled on low heat if needed. The waterproof diaper shell, on the other hand, may not dry in the tumble dryer, as the heat can damage the waterproof TPU coating and shorten the life of the rubber bands.